8
Channel Two
Input 2:
DC coupled input for channel 2.
•
This input will accept both audio and CV signals.
CV Input:
DC coupled control voltage input for channel 2.
•
This input will accept both audio and control voltage signals.
•
Incoming signals are half wave rectified at the
CV Input.
Any
negative portions of external signals will be cropped to 0V.
Amplitude/CV Attenuator:
The
Amplitude/CV Attenuator
is a
dual-purpose fader for Channel 2.
•
The fader controls the amplitude of the signal present at
Input 2
.
When no control voltage signal is connected, the
CV Input
receives
a nor5V reference voltage.
•
Unity gain is set when the fader is set to approximately two thirds of
its maximum range. Any fader position above that will add gain to
the signal.
•
When control voltage is applied, the fader becomes an attenuator
for the signal present at the
CV Input
of channel 2.
•
Unity gain of the incoming control voltage signal is set when the
fader is at approximately two thirds of its maximum range.
Содержание vinca
Страница 1: ...vin c Dual VCA User Manual...
