Instruo Saich, Руководство пользователя

Страница: 6 / 32

6
Case Tuning
Because saïch incorporates four fully analogue oscillator cores
with definable intervallic offsets, it can require a little assistance to
acclimatise to a new home. With today’s endless possible combinations
of power supply and module options in Eurorack, variations in -/+ 12V
power rail balance is something that might need to be compensated for.
In other words, the
saïch can need tuned on a case-by-case basis
(Pun intended!).
Once
saïch is installed into the system, allow the system to warm up
(10-15 min).
Once the system is warm, run through the following tuning procedure.
This procedure sets the centre frequencies for all
Detune controls, as
well as octave references for the intervallic offsets. The procedure can
be done by ear using a referencing of C5, but an electronic tuner can
greatly aid the process.
Step 1
Centre all three Detune controls.
Step 2
Centre the CTRL Attenuverter and Fader . Ensure
the CTRL Button is in its unlit state (press the Mix
Profile Button to return from alternate controls)
Step 3
Hold down the CTRL Button for 3 seconds until the
Voice Indicators blink. The tuning procedure is now
active and is indicated by a blinking amber/white
CTRL Button and a flashing amber Fader .