Instron 1000KPX-J3D, Руководство по эксплуатации

Страница: 12 / 70

Chapter 1: Introduction
12 M47-17035-EN
Frame configuration options
Frames can be configured with a variety of options. These options include:
•
Crosshead variations:
• J1-style crosshead - Crosshead adjusted and secured manually
• J3-style crosshead - Crosshead adjusted and secured with hydraulic crosshead lift and lock
cylinders
• J4-style crosshead - Fixed crosshead
•
Test opening variations:
• A - Basic test opening
• B - Increase vertical test space by 305 mm (12 in)
• C - Increase vertical test space by 610 mm (24 in)
• D - Increase vertical test space by 915 mm (36 in)
•
Load cell options for 600KPX:
• L1 - Tension/compression load cell with capacity of 300 kN (67,500 lbf)
• L2 - Tension/compression load cell with capacity of 400 kN (90,000 lbf)
• L3 - Tension/compression load cell with capacity of 600 kN (135,000 lbf)
The configuration options selected for your frame are identified in the complete model number of the
frame. The complete model number is defined as:
{Capacity (in kN)}{Model family}-{Crosshead style option}{Test opening option}-{Load cell option}
Some examples would be:
600KPX-J1D-L2, 600KPX-J3B-L3, 1000KPX-J3D, 1500KPX-J1D, 2000KPX-J3D
It is very important to be aware of and understand the configuration of your frame as you perform various
operations and procedures so that they can be performed correctly - the complete model number (in
whole or in part) is used throughout this manual to identify specifications and procedures appropriate for
your frame configuration. Knowing the complete model number of your frame is critical. To determine
the complete model number (and thus configuration) of your frame, refer to one of the following:
•
The frame serial tag (see “System identification” on page 13 )
•
The Instron quote
Testing accessories
Testing accessories are purchased separately from the frame. Testing accessories either provide a
means to secure the specimen in the test space or provide additional functionality to the frame.
Instructions on the installation, use and maintenance of Instron testing accessories are provided
separately with each testing accessory. A variety of testing accessories are available. Contact your
Instron Sales Representative for more information.