Instron 1000KPX-J3, Руководство по концепции системы

Страница: 10 / 58

Chapter 1: Introduction
10 M47-17036-EN
System overview
Purpose
Warning
The Instron Model KPX Static Hydraulic Universal Testing Systems are available in a variety of capacities.
They are ideally suited for tension, compression, bend, shear, flexure and static cyclic testing on high
strength materials. These frames feature a single, large test space and long test stroke that, together,
provide users with great flexibility in the specimen size that can be tested and in the grips, fixtures and
extensometry that can be used for the test.
System components
Model KPX systems consist of:
•
Frame
•
Hydraulic Power Supply (HPS)
•
59 Series control unit and other system controls and electronics
•
Instron approved computer system with Instron materials testing software
Figure 1 identifies the system components and various frame configurations (see “Frame
configuration options” on page 12 ).
If the equipment is used in a manner not specified by Instron, the protection provided by the
equipment may be impaired. Injury to personnel or damage to the system may result. Be
sure to read and understand the material presented in these instructions and in any other
accompanying instructions.