Instar IN-5905 HD, Руководство пользователя, Страница: 11 / 38

9
-
EN
To check the IP address of your Windows computer and your network parameters
please do the following:
1. Click on [START] -> and type in “cmd” into the search fi eld.
2. In the window that pops up please type “ipcon fi g”.
3. Now the IP address and the subnet mask will be shown.
In case your camera isn’t automatically assigned an IP address, the camera will be shown
inside
a wrong
IP address space. A double click on the camera’s IP will then open the
IP / Network con fi guration window ( see below ) allowing to manually assign an address.
Please set the following information according to your network:
-
IP Address
(for example 192.168.x.x)
-
Subnet Mask
(for example 255.255.255.0)
-
Gateway
(IP Address of your router; for example 192.168.x.1)
-
DNS Server
(IP Address of your router; for example 192.168.x.1)
- Http Port (TCP Port; for example 80)
In case the INSTAR Camera Tool doesn’t fi nd your INSTAR IP camera please make sure
that the status LED for the LAN connector is active. For troubleshooting please check
on page 8 in this user manual.
Troubleshooting: