18
| [email protected] | 1-800-828-7280
instantpot.com |
19
Control panel
1 Smart Programs
Pressure cooking
• Soup/Broth
• Meat/Stew
• Bean/Chili
• Cake
• Egg
• Rice
• Multigrain
• Porridge
• Sterilize
• Pressure Cook
Non-pressure cooking
• Slow Cook
• Sauté
• Yogurt
• Sous Vide
• Keep Warm
2 Time display
Shows the time in HH:MM format. Counts up or down, depending
on the Smart Program.
3
Pressure fields
LEDs show if the multicooker is using Low or High pressure during
pressure cooking.
4 Less / Normal / More
Preset cooking time or temperature levels, depending on the Smart
Program.
5
− / + buttons
Adjust time for cooking, Delay Start and Keep Warm.
6 Pressure level
Toggle between Low Pressure and High Pressure.
7 Keep Warm
Turns the Keep Warm setting on or off.
8 Delay Start
Delay the start of cooking.
9 Cancel
Stop a Smart Program at any time.
1
2
4
8
3
5
9
1
6
7
Settings
Setting
Description
Turn sound on
When in standby, press and hold the
+
button
until the display shows
S On
.
Turn sound off.
When in standby, press and hold the
−
button
until the display shows
SOFF
.
Audible safety and error message alerts
cannot be turned off.
Adjust and save custom cooking times
and temperatures.
Once a Smart Program is selected, changes
to the cooking time, temperature and pressure
level are saved once the Smart Program
begins.
See
Reheat or warm for long periods.
Keep Warm can be used for up to a maximum
of 10 hours (10:00).
01
When in standby, press
Keep Warm
.
02
Press
Keep Warm
again to cycle through
Less
,
Normal
and
More
warming
temperature levels.
03
Use the
− / +
buttons to set a warming
timer.
04
Keep Warm begins automatically after
10 seconds.
When cooking thick or starchy foods, heat may
not dissipate evenly. To ensure food safety,
stir the contents of thicker dishes every 40
to 60 minutes.
When Keep Warm completes, the display
shows
End
.