Inspur NF8480M5, Руководство пользователя

Страница: 121 / 167

BMC Settings
115
- White space is not allowed.
- No more than 64 characters.
9.15.3 SNMP User
SNMP user is used to support SNMP Get/Set.
●
Default read community: cmccread and inspur@0531
●
Default write community: cmccwrite
●
SNMPV3 supports user authentication, supported authentication algorithm is SHA and
MD5;
●
SNMPV3 supports user privacy , supported privacy algorithm is DES and AES;
●
Default SNMPV3 user is sysadmin, authentication algorithm is MD5, authentication
password is rootuser; privacy algorithm is DES, privacy password is rootuser.
9.15.3.1 User Security
●
SNMPV3 supports user authentication, supported authentication algorithm is SHA and
MD5;
●
SNMPV3 supports user privacy, supported privacy algorithm is DES and AES.
9.15.4 User Privilege
9.15.4.1 User Privilege for IPMI
BMC has two ways to receive IPMI CMD, out-band and in-band.
●
Out-band mode means sending IPMI CMD to BMC by LAN, BMC will authenticate user
and password.
●
In-band mode means sending IPMI CMD in HOST OS. In this mode, IPMI CMD does
not need to authenticate user and password, because he will get the highest privilege if
someone accesses the HOST OS. So if the user forgets password or password expires, this is
a way to change password or disable password security rules.
Please refer to IPMI 2.0 Spec, Appendix G - Command Assignments. Common privilege as
below:
Table 31 User Privilege for IPMI
User Privilege Supported Operation
Administrator Write/Read
Operator Read Only
User Read Only
No Access Non