Inspur NF5180M6, Руководство пользователя

Страница: 73 / 103

65
Solutions:
1. Check whether the monitor is powered up normally;
2. If yes, but there is still no output on the monitor, check whether the monitor is
connected properly to the server's VGA port;
3. If yes, but there is still no output on the monitor, please replace with another
monitor;
4. If the problem still persists, maybe the VGA port is abnormal. Please log into the
BMC Web interface. Launch the BMC remote KVM (For detailed reference document,
please see
Firmware Update and Configuration ) to see if there is normal output: If
yes, maybe the VGA port on the motherboard is abnormal, please contact Inspur
Customer Service; if no, please record the detailed warning information;
5. If the instructions above do not resolve the problem, please call Inspur Customer
Service Hotline (1-844-860-0011/1-760-769-1847) or email to
serversupport@inspur.com , and inform us of the detailed warning information and
failure.
7.1.3 Abnormal LED on the Front Panel
Symptoms:
The status LED on front panel illuminates red.
Solutions:
Identify the abnormal LED based on Front Panel Buttons and LEDs
1. If the system status LED illuminates red, check whether the server is under normal
operation: If yes, log into the BMC Web interface to view the BMC logs (For detailed
reference document, please see
Firmware Update and Configuration ) to check
whether there are warnings. If yes, please record the detailed warning
information;
2. If the power status LED is abnormal, please check if the PSU LEDs on the rear panel
are abnormal (amber or off): If the PSU LEDs are normal, please log into the BMC
Web interface to check the BMC logs (For detailed reference document, please see
Firmware Update and Configuration ) to see if there are warnings. If yes, please
record the detailed warning information; if all the PSU LEDs are abnormal, please
refer to
All the PSU LEDs are green ; if one PSU LED is abnormal, please refer to The
PSU LEDs are off or amber ;
3. If other status LEDs are abnormal, log into the BMC Web interface to check the BMC
logs to see if there are warnings; if yes, please record the detailed warning
information;
4. If the instructions above do not locate or resolve the problem, please call Inspur
Customer Service Hotline (1-844-860-0011/1-760-769-1847) or email to