Inspur NF5180M6, Руководство пользователя

Страница: 55 / 103

47
1. Take the new PSU out from the antistatic bag.
2. Make sure the blue release tab is on the right of the PSU. Grasp the handle and
push the PSU into the power bay until it snaps into place.
Figure 4-38 Installing the PSU
4.4.11 DIMM Replacement
To remove the DIMM:
1. Remove the access panel (Refer to Access Panel Replacement).
2. Remove the air duct (Refer to Air Duct Replacement).
3. Remove the crossbar (Refer to Crossbar Replacement).
4. Locate the DIMM you want to replace.
5. Push the release tabs on both ends of the DIMM slot outward to unlock it.
6. Gently lift and remove the DIMM from the slot.
Figure 4-39 Removing the DIMM
7. Put the DIMM into the memory box.
To install the DIMM: