4
January 2017
The rolling base has commode pail system
that is pre-installed to the system. If you
need to remove it, please follow these
steps:
1. Turn the rolling base upside-down.
2. Remove both support rails by using a
Phillips screw driver (Fig. 1).
Rolling Base Assembly:
1. Slide the footrest clamp over the leg
tubes making sure that the notched end
faces upward. Align the center slot on
the clamp to the holes on rolling base
leg (Fig. 2). Secure the clamp with
bolts. The height is adjustable and can
be re-positioned when the seating is
fully assembled for correct fi t.
2. Insert the casters into the socket on
the bottom of the individual leg tubes
(Fig. 3).
3. Insert the leg tubes into the rolling
base by depressing the locking button
and sliding the leg tube up the frame (Fig. 4).
Tub Base Assembly:
1. Screw the leveling feet into the tub base leg
tubes, if not already done (Fig. 5)
2. Insert the individual leg tubes into the tub base
by depressing the locking button and
sliding the leg tube up the frame (Fig. 4).
Figure 3
Figure 1
Figure 4
Figure 5
ASSEMBLY OF TRANSFER SYSTEM
Align slot to
the holes
Notch
Figure 2
