❏
Stainless steel steam coil
tank heat
❏
Pressure reduction valve
and line strainer
❏
Steam booster
❏
Electric booster
❏
Security package
❏
S/S front enclosure panel
❏
Chemical sanitizer injector
package for low temperature
operations
❏
Insulated hood and doors
❏
Door activated drain closers
OPTIONAL ACCESSORY EQUIPMENT
STANDARD EQUIPMENT
Item #_____________
CSI
-
11400
TRAC 321-2 RPW
AUTOMATIC DOUBLE TANK
TRAY WASHER
6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800-344-4802
www.insingermachine.com
DESIGN
Automatic Conveyor, double tank tray washer with recirculating
prewash and wash, and fresh water final rinse. Capacity is 528
trays per hour (based on a 15” tray). Designed for left or right
hand conveyor travel, as specified.
●
Tank heat: 15 KW electric
immersion heater or
steam injector
●
Capillary thermometer for
prewash and wash
●
In-line thermometer for final rinse
●
Vacuum breaker on all
incoming lines
●
Manifold cleanout brush
●
Inspection doors
●
S/S frame, legs and feet
●
SureFire
TM
Start-Up and
Check-Out Service
●
Automatic tank fill
●
Vents with adjustable
damper controls
●
Low water protection
●
Detergent connection provision
●
Single point electrical connection:
motors, controls and heaters
●
Top mounted control panel
(NEMA 12)
●
Simplified scrap screen design
●
Door safety switches
●
Standard frame drip proof motors
●
Tray unload table
●
Override switch for de-liming
