background image

7

Insignia 5.8 Cu.ft. Upright Freezer

www.insigniaproducts.com

For proper operation, it’s very important that you level the freezer using 
the leveling legs. If this is not done, the door may not close or seal 
properly, causing cooling, frost, and moisture problems. Turn the leveling 
legs clockwise to raise that side of the freezer or counterclockwise to 
lower that side. The leveling legs are easier to adjust if you have someone 
push against the top of the freezer to take some weight off.

When moving your freezer, do not tilt it beyond 45° from upright.

Finding a suitable location

Place your freezer on a floor that is strong enough to support the freezer 
when it is fully loaded. 

This freezer is designed to be free standing only, and should not be 
recessed or built-in.

Allow 7.9 inches (20 cm) of space between the sides of the freezer and the 
walls, 3.9 inches (10 cm) between the back of the freezer and the wall, and 
11.8 inches (30 cm) between the top of the freezer and the ceiling. This 
allows for proper air ventilation. Adjust the feet to keep the freezer level.

If you locate the freezer next to a fixed wall, allow sufficient space on the 
hinge side for the door to swing open.

Locate the freezer away from direct sunlight and sources of heat, such as a 
stove, heater, or radiator. Direct sunlight may affect the acrylic coating and 
heat sources may increase electrical consumption. Extremely cold 
temperatures may also prevent the freezer from performing properly.

Avoid locating the freezer in moist areas. 

Providing a proper power supply

Check your local power source. This freezer requires a 115V, 60Hz power 
supply.

Use a receptacle that accepts the grounding prong. The power cord is 
equipped with a 3-prong (grounding) plug which mates with a standard 
3-prong (grounding) wall outlet to minimize the possibility of electric 
shock hazard from this freezer. We recommend that the freezer be 
plugged into an electrical circuit serving only this appliance and that the 
circuit cannot be turned off with a switch or pull-chain.

3-prong receptacle

Receptacle box cover

3-prong plug

Grounding lead

Grounding adapter

Receptacle box cover

Screw
Receptacle

Using a 3-prong plug and outlet

Using a grounding adapter

NS-UZ58WH6-NS-UZ58WH6-C_15-0902_MAN_V4_ENG.fm  Page 7  Wednesday, November 25, 2015  3:15 PM

Содержание NS-UZ58WH6

















Отзывы: