5
Insignia Single Screen/Double Screen Monitor Mount
www.insigniaproducts.com
Assembling and installing the monitor
mount
(Applies to single or double monitor versions - single monitor version
shown)
Step 1 - Assembling the support arm and support tube
1
Install the cable support clip (
9
) by sliding it on the support tube (
8
).
2
Thread the M5 x10 mm sunk bolt (
7
) onto the arm support ring (
6
),
then place on the support tube (
8
) at the level you want the support
arm (
3
) and tighten the M5 x 10 mm sunk bolt (
7
) to hold it in place.
3
Slide the monitor plate and support arm assembly (
3
) onto the
support tube (
8
), making sure that the curved portions of the arm are
pointed down. Secure it by tightening the single-arm knob (
4
).
4
Install the tube cover (
1
) on top of the support tube (
8
) using the
M4 x 10 mm bolt (
C
), then tighten it with the 3 x 3 mm Allen
wrench (
D
).
Flat side up
Curved
side down
NS-PMM6120_NS-PMM6220_15-0664_MAN_V1_ENG.fm Page 5 Saturday, November 7, 2015 11:36 AM
