6
NS-HWD1761
www.insigniaproducts.com
ASSEMBLY INSTRUCTIONS
Step 1: Preparing the top and bottom
Caution:
Assemble your stand on a carpeted floor or on the empty box to avoid scratching your stand.
1
Place the top (
1
) and bottom (
4
) flat on the floor.
2
Insert wooden dowels (
C
) into the eight inside holes in the ends of the top and bottom.
3
Screw four cam screws (
B
) into the outside holes in the top (as shown).
Note:
Only screw the cam screws in to the depth of the thread.
You’ll need:
B
(4)
C
(8)
Phillips screwdriver