FIXED-POSITION WALL MOUNT FOR TVs 40-70 in.
7
www.insigniaproducts.com
STEP 3 -
Option 1: Attaching the mounting hardware to TVs
with a flat back
1
Align the left and right TV brackets (
1
) with the upper screw holes on the back of the TV. Make sure that
the brackets are level.
2
Install washers (
8
) and screws (
3
,
4
, or
5
) into the holes in the back of the TV.
3
Install TV standoffs (
2
) in the lower screw holes on the back of the TV using washers (
8
) and screws (
3
,
4
,
or
5
).
4
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
Important:
After attaching
the TV brackets, adjust the
straps (by sliding the buckle
up or down) so they are level
with the bottom of the TV.
2
(2)
3
(4)
Phillips screwdriver
1
TV
brackets (2)
or
4
(4)
8
(4)
5
(4)
Level
or