Insignia NS-HMG1856 Скачать руководство пользователя страница 11

11

Metal and Glass TV Stand

www.insigniaproducts.com

CARE AND MAINTENANCE

Glass

• Use a commercial liquid glass cleaner and a soft cloth. 
• Do not use harsh powders or any other abrasive substances as they will scratch the glass.

WARNING

Please use your stand correctly and safely. Improper use can cause safety hazards or damage to your furniture or household items. 

Carefully read 

the following chart.

Look out for:

What can happen:

How to avoid the problem:

• Children climbing on the stand.
• A child may try to reach a toy or other object by climbing 

on the stand.

• Children will play and be active near the TV.

• Risk of injury or death.
• A child climbing on the stand can make it top-heavy and 

cause it to tip over.

• A child playing with a TV can cause it to tip over.

• Never allow children to climb on or play with the stand.
• Do not place toys or food on the top shelves. Children may 

try to climb to reach them out of curiosity.

• Improper use of the stand to support TVs.
• The stand is designed for use with TVs with a specified 

maximum weight rating and recommended size of the 
TVs it will safely support.

• Risk of injury or death.
• TVs can be very heavy. Note, older CRT TVs tend to be 

unbalanced and prone to tipping forward.

• A TV must only be set on furniture specifically designed to 

support a television.

• Never use a TV that exceeds the weight ratings or size 

guidelines specified for the stand.

• Overloaded shelves.

• Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves can break.

• Never exceed the weight limits shown in the instructions.
• Work from the bottom to the top when loading shelves.
• The middle and bottom shelves can only support 50 lbs. 

while the top can support 110 lbs.

• Improperly moving the stand.

• The stand can tip over or break if improperly moved.
• Risk  of  injury.

• Unload shelves from the top to the bottom before moving 

the stand.

• Do not push the stand, especially on a carpeted floor. Have a 

friend help you lift the item and set it in place.

• Do not lift the stand using the top shelf. Lift from the frame 

or leg assembly.

• Remove the TV before moving the TV stand.

• The TV/stand assembly tipping forward.

• Risk of injury.
• Top-heavy furniture can tip over.
• The TV and stand could be damaged.

• Do not exceed the TV stand’s weight limit.
• Do not place a TV larger than 65” diag. on your TV stand.

NS-HMG1856_17-0621_MAN_V3_ENG.fm  Page 11  Tuesday, August 1, 2017  8:01 AM

Содержание NS-HMG1856














Отзывы: