www.insigniaproducts.com
7
NS-HF2005
STEP 3 - Install the middle and lower shelf frames.
You’ll need
1
Make sure that the holes on the frames are facing up.
2
Align the holes in the middle frame (
4
) with the holes in the side frames, then insert two 6 × 28 × 16 mm Allen bolts (
B
)
through the holes on each end of the middle frame and into the side frames. Use the Allen wrench (
E
) to tighten the
bolts. Do not fully tighten the bolts.
3
Align the holes in the lower frame (
5
) with the holes in the side frames, then insert two 6 × 28 × 16 mm Allen bolts (
B
)
through the holes on each end of the lower frame and into the side frames. Use the Allen wrench (
E
) to tighten the
bolts. Do not fully tighten the bolts.
CAUTION:
Do not fully tighten the bolts until the end of step 6.
Note:
The middle frame (
4
) has holes near the center of the frame sides. The lower frame (
5
) has holes near the outer edges of the
frame.
5
Lower frame (1)
B
6 × 28 × 16 mm Allen bolt
(8)
4
Middle frame (1)
E
Allen wrench (1)
To
p
Fron
t
Fron
t
Fron
t
To
p
To
p
Fron
t