www.insigniaproducts.com
9
NS-HF2003
STEP 2 - Assemble the left side and middle panels.
You’ll need
1
Insert two large cam locks (
D
) into the cam lock holes on the ends the middle crossbar (
5
). Make sure that the openings
on the cam locks face the cam screw holes.
2
Put a drop of glue into each dowel hole on the left side panel (
6
) and middle panel (
7
).
3
Insert the dowels and cam screws on the ends of the middle crossbar into the holes in the left side panel and middle
panel.
4
Tighten the cam locks in the middle crossbar.
5
Secure the upper crossbar (
4
) to the left side panel with one wood screw 3.5 × 12 × 6 mm (
G
).
Phillips screwdriver
6
Left side panel (1)
7
Middle panel (1)
5
Middle crossbar (1)
4
Upper crossbar (1)
D
Large cam lock (2)
G
Wood screw 3.5 × 12 × 6 mm
(1)
Flat blade screwdriver
A
Glue (1)
