www.insigniaproducts.com
11
NS-HF2003
STEP 4 - Attach the feet.
You’ll need
1
Carefully turn your stand on its side with the bottom panel (
2
) facing you.
2
Screw the middle foot (
10
) into the hole in the center of the bottom panel.
3
Align the four side feet (
9
) with the holes on each corner of the bottom panel. Make sure that the angled sides of the
feet face inward.
4
Insert two Allen bolts 6 × 50 × 10 mm (
J
) through each foot and the bottom panel and into your stand. Tighten the
screws with the Allen wrench (
K
).
9
Side foot
(4)
J
Allen bolt 6 × 50 × 10 mm (8)
K
Allen wrench (1)
10
Middle
foot (1)
