16
www.insigniaproducts.com
STEP 5: Preparing the cabinet top
You need:
1
Use a Phillips screwdriver to attach two long KD bolts (
D
) into the outside holes in the cabinet top (
1
). Don’t
overtighten.
2
Use a Phillips screwdriver to attach a connection bar (
18
) to each side of the top (
1
) with four 4 x 22 screws (
V
).
D
KD Bolt (long) (2)
Phillips screwdriver
1
Cabinet top
V
4 x 22 mm screws (8)
18
Connection bar (2)