Front view
Back view
PACKAGE CONTENTS
• 64-LED On-Camera Video Light
•
Quick Setup Guide
FEATURES
• 64 bright white LEDs illuminate your subject
• Daylight color temperature for natural lighting
• Integrated mount attaches to any camera or camcorder with a hot-shoe
• Threaded mounting hole for easy attachment to a tripod.
• Built-in light diffuser softens the light
• Uses four AA batteries (not included)
INSTALLING THE BATTERIES
1
Slide the battery compartment lock switch to
the right.
2
Put a coin in the battery compartment opening
notch and pry outward to open the compartment.
3
Install four AA batteries in the battery
compartment, noting the + and - orientation.
4
Replace the battery compartment cover and
lock it.
Quick Setup Guide |
NS-DVL64C1
64-LED On-Camera Video Light
Before using your new product, please read these instructions to prevent any damage.
LEDs
Battery
compartment
lock
1/4" bracket
mounting hole
Battery compartment
lock/unlock switch
Brightness
controller
Power switch
DC power jack
Locking ring
Camera hotshoe
connection
SETTING UP YOUR VIDEO LIGHT
1
Loosen the locking ring by turning it
counterclockwise.
2
Slide the light onto the hot-shoe of your camera
or camcorder.
3
Tighten the locking ring to secure the light to
your camera or camcorder.
Note
: If your camcorder has no hotshoe connection, we
recommend that you purchase a connecting bracket for
your camcorder. The video light has a 1/4" bracket mounting hole. You can easily
connect both the light and the camcorder to a bracket.
