9
Multi-Function Stereo Boombox with Bluetooth
www.insigniaproducts.com
Display
In CD mode
—the display shows the current track time elapsed (during playback)
and the total number of tracks (in stop mode).
In Radio mode
—the display shows the preset selected and the frequency.
In Tape mode
—the display shows “
CAS
.”
In Bluetooth mode
—the display shows “
BT
.”
In AUX mode
—the display shows “
Aud
.”
Setting up your boombox
Connecting the AC adapter
1
Make sure that your local AC power source matches the voltage shown on the
plate located on the bottom of the boombox. If it does not, consult your
dealer or service center.
2
Insert the small connector at the end of the AC adapter into the
AC IN
jack on
the back of your boombox.
3
Plug the AC adapter into a wall power outlet.
Installing the batteries
1
Turn your boombox over, then open and remove the door to the battery
compartment.
CAUTION:
To protect your boombox during thunderstorms, unplug the AC
adapter from the AC power outlet.
Notes:
Unplug the AC adapter when not in use.
The batteries are automatically bypassed when the AC adapter is used.
- Power Electrical Specs: 120V ~ 60 Hz
- Device Electrical Specs: 10 VAC, 1.0 A
Radio band
Random
playback
activated
Radio program mode
activated
Repeat mode:
On (1)–repeat current
track
On (no 1)–repeat all
tracks
Tuner frequency unit
Source, volume level, or program
FM Stereo
signal
indicator
