14
NS-BBBT20
www.insigniaproducts.com
Listening to a Bluetooth sound source
Before you can use your boombox with a Bluetooth device, you need to
pair your device to the boombox. After your boombox is plugged in and
turned on, do the following:
Pairing your devices
1
Select
Bluetooth
as the input source by pressing the
(source)
button one or more times until BT blinks on the display. The status
indicator blinks blue and the display shows “BT.”
2
Navigate to your device's Bluetooth settings, turn on Bluetooth, then
search for available devices. For additional information on pairing
your device, see your device’s documentation.
3
On your Bluetooth device, select “NS-BBBT20” from the device list.
Repeat steps 1-2 if “NS-BBBT20” is not displayed.
4
If a PIN code is requested, enter “0000.”
5
During the pairing process, the display turns blue while BT is blinking.
When the Bluetooth connection has been established, BT stops
blinking and the display shows “BT.”
Disconnecting your devices
•
Turn off the Bluetooth function on your device.
Notes:
• Your boombox must be turned on to make a Bluetooth connection.
• Place the Bluetooth device within 33 ft. (10 m) of your boombox.
• Bluetooth is used as a convenient connection to your sound source.
• Bluetooth will not connect the boombox to external speakers.
Notes:
• Some devices, such as an iPhone, connect immediately after pairing so the
status indicator on your Bluetooth remains on. Other devices, such as
notebook computers, may ask you if you wish to connect. In this instance,
the status indicator continues to blink until a connection is established.
• Your boombox saves pairing information for up to eight devices. However,
it can only be connected and play content from one device at a time.
• When you turn on your boombox, it automatically connects to the last
connected device if that device is in range. To connect to a different paired
device, turn off Bluetooth or unpair from the currently paired device and
manually connect to the other paired device.
Important:
Make sure that the device you connect and select as your sound
source is outputting sound to the boombox. See your device's user manual for
more information.
