background image

www.insigniaproducts.com

4

• Do not place obstacles around air-inlets or inside of air-outlet. It may cause failure of appliance or accident.
• Use caution when unpacking and installing. Sharp edges could cause injury.
• Do not put a pet or house plant where it will be exposed to direct air flow. This could injure the pet or plant.
• Do not clean your air conditioner with water. Water may enter the unit and degrade the insulation. It may cause an 

electric shock.

• When the unit is to be cleaned, switch off, and turn off the circuit breaker. Do not clean unit when power is on as it may 

cause fire and electric shock. It may cause an injury.

• Hold the plug by the head of the power plug when taking it out. It may cause electric shock and damage.
• Do not place heavy object on the power cord and ensure that the cord is not compressed. There is danger of fire or 

electric shock.

• Ventilate the room well when used together with a stove, etc. An oxygen shortage may occur.
• Do not use for special purposes. Do not use this air conditioner to preserve precision devices, food, pets, plants, and art 

objects. It may cause deterioration of quality, etc.

• Ensure that the installation bracket of the outdoor appliance is not damaged due to prolonged exposure. If bracket is 

damaged, there is concern of damage due to falling of unit.

• Turn off the main power switch when not using the unit for a long time. It may cause failure of product or fire.
• Do not drink water drained from air conditioner. It contains contaminants and could make you sick.
• If water enters the unit, turn the unit off at the power outlet and switch off the circuit breaker. Isolate from the electrical 

supply by taking the power-plug out and contact a qualified service technician.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental 

capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance. 
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons 

in order to avoid a hazard.

• The appliance shall be installed in accordance with national wiring regulations.
• Do not operate your air conditioner in a wet room such as a bathroom or laundry room.
• Contact an authorized service technician for repair or maintenance of this unit.
• Contact an authorized installer for installation of this unit.

IMPORTANT SAFETY INSTRUCTIONS

NOTE

: The power supply cord with this air conditioner contains a current detection device designed to reduce the risk 

of fire. Please refer to Operation of Current Device on page 6 for details. In the event that the power supply cord is 
damaged, it cannot be repaired. It must be replaced with a cord from the product manufacturer.

WARNING

: Avoid fire hazard or electric shock. Do not use an extension cord or an adapter plug. Do not remove any 

prong from the power cord.

WARNING

: For your safety, do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or 

any other appliance.

• Do not use this device to turn the unit on or off.
• Always make sure the RESET button is pushed in for correct operation.

Do not, under any 

circumstances, cut, remove, 

or bypass the grounding 

prong.

Grounding-type wall receptacle

Power supply cord with

3-prong grounding plug and

current detection device

Содержание NS-AC8WU3



































Отзывы: