Insignia NS-A3111 - AV System, Руководство пользователя

Страница: 10 / 64

10
Insignia NS-A3111 DVD Executive Shelf System
www.insignia-products.com
Installing your shelf system
Install your shelf system on a stable flat surface.
There must be sufficient room in front of your
shelf system for the disc tray to open. Positon
your shelf system so that it can have a direct line
of sight to the remote control.
Using your DVD shelf
system
Getting started
To get started:
1 Finish the connection for the shelf system as
shown in the previous section.
2 Connect power to your shelf system.
3 Turn on the TV and set to the correct video-in
channel.
To turn your shelf system on:
1 Plug in your shelf system. The standby
indicator on the front panel lights up.
2 Press Standby/On . After a few seconds
the display shows “NO DISC.”
3 Turn on your television and select the AV
input that your shelf system is connected to.
To start playback:
1 Press (OPEN/CLOSE). The disc tray
opens.
2 Place a DVD in the disc tray, then press
(OPEN/CLOSE). The player reads the disc
and starts playback. Before the movie starts
to play, a menu appears.
3 Select PLAY MOVIE , then press OK . The
movie starts.
4 Although you can watch a movie immediately,
to get the best results from your shelf system,
press
STOP , then complete the following
system setup options. You only need to do
this when you first set up your shelf system.
Basic setup
To use the basic setup menus:
1 Press SETUP/EXIT on the remote control to
enter the
System Setup
menu in stop mode.
To exit the System Setup menu, press
SETUP/EXIT again.
2 Press or to navigate to one of these
menus: System Setup , Language Setup ,
Video Setup, or Audio Setup.
3 When a menu is highlighted, press or
to select options within the menu.
Available options for each setting appear on
the right side of the screen.
4 Press or OK to move to the right column.
5 Press or to select a new setting, then
press OK to confirm the changed setting.
6 Repeat Steps 3 to 5 to change the other
settings. For more information, refer to
appropriate sections in this guide.
7 When you have finished making changes,
highlight
EXIT/SETUP , then press OK , or
press SETUP/EXIT again to exit the System
Setup menu.
Caution
• Do not install this shelf system in a confined
space such as a bookcase.
• Do not expose your shelf system to extremes of
temperature or humidity.
• Avoid placing your shelf system on a hot
surface such as on top of other hot running
equipment.
• Make sure that there is adequate ventilation to
your shelf system.
Notes
• Connect the AV cord only after the speakers,
antenna, and all optional equipment have been
connected.
• Never make or change any connections with
power turned on.