17
NS-40D510NA15 Insignia 40" LED TV
www.insigniaproducts.com
AV (composite video) (good)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect an AV cable (not provided) to the green
Y/VIDEO
jack and
L
and
R
audio jacks on the back of your TV
and to the AV (composite video) and audio out jacks on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
S
or
T
to highlight
AV
, then press
ENTER
.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
Y/VIDEO
jack.
Notes
• The
Y/VIDEO
,
P
B
, and
P
R
video jacks (used to connect a component
device) share the
L
and
R
audio jacks with the
Y/VIDEO
jack (used to
connect an AV (composite video) device).
• When you connect the audio using the
L
and
R
audio jacks, the audio
output is analog.
Cable or
satellite box
AV cable
(composite video cable)
Back of TV
AV
(composite
video)
cable
connector
AV
(composite
video) jack
Audio cable
connectors
Analog
audio jacks
On your TV