Insignia NS-32LD120A13, Руководство пользователя

Страница: 29 / 54

25
Insignia 32" LCD TV/DVD Combo
www.insigniaproducts.com
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV/DVD combo
searches for channels with signals and stores the
channel information in the channel list. When you
press
CH or CH , your TV/DVD combo goes to
the next or previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
To automatically scan for channels:
1 Press MENU . The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS , then press
T or OK . The Channels menu opens.
3 Press S or T to highlight Auto Channel Search ,
then press OK . The Channels-Auto Channel
Search screen opens.
4 Press S or T to highlight Antenna , Cable , or
Satellite Box , then press OK .
A. If you select Antenna , your TV scans for
available channels. The scan may take several
minutes.
B. If you select Cable , a message asks if you have
a cable box.
• Select No if no cable box is connected.
Your TV scans for available channels. The
scan may take several minutes.
• Select Yes if a cable box is connected. A
message asks how you connected the
cable box to your TV.
• Select AV , Component , or HDMI if you
connected a cable box to your TV using
one of these cables. Read the message,
then press
OK to close the wizard.
• Select Coaxial if you connected a cable
box to your TV using a coaxial cable.
Read the message, then press
OK to
start the channel scan (VHF channels
only).
C. If you select Satellite Box , a message asks
how you connected the satellite box to your
TV.
• Select AV , Component , or HDMI if you
connected a satellite box to your TV using
one of these cables. Read the message,
then press
OK to close the wizard.
• Select Coaxial if you connected a satellite
box to your TV using a coaxial cable. Read
the message, then press
OK to start the
channel scan (VHF channels only).
Hiding channels
You can hide channels in the channel list. When you
press
CH or CH , your TV/DVD combo skips the
hidden channels. You can still tune to a hidden
channel by pressing the number buttons for the
channel.
To hide channels:
1 Press MENU . The on-screen menu opens.
Move
OK
ENTER
MENU EXIT
Exit Previous Select
Picture
Picture Mode Energy Savings
Brightness 00
Contrast 00
Color 00
Tint 00
Sharpness 00
Advanced Video
Reset Picture Settings
Adjust settings to affect picture quallty
PICTURE CHANNELS SETTINGS PHOTOS AUDIO
Move
OK
ENTER
MENU EXIT
Exit Previous Select
On
On
Channels
Channel Strength
Audio Only
Audio Zoom
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Automatically search for channels
PICTURE CHANNELS SETTINGS PHOTOS AUDIO
Move OK
ENTER
MENU EXIT
Exit Previous Select
Choose Your TV source
Antenna
Cable
Satellite Box
Select if using an antenna for standard or HD TV.
Channels-
Auto Channel Search
PICTURE CHANNELS SETTINGS PHOTOS AUDIO
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Move
OK
ENTER
MENU EXIT
Exit Previous Select
Picture
Picture Mode Energy Savings
Brightness 00
Contrast 00
Color 00
Tint 00
Sharpness 00
Advanced Video
Reset Picture Settings
Adjust settings to affect picture quallty
PICTURE CHANNELS SETTINGS PHOTOS AUDIO