16
NS-24E400NA14 Insignia 24" LED TV
www.insigniaproducts.com
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE
jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
S
or
T
to select
TV
, then press
ENTER
.
7
If you cannot tune to channels you know exist, scan for channels. See “
Automatically scanning for channels
” on
page
.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Cable or
satellite box
Coaxial cable
Back of TV
Coaxial cable
connector
ANT/CABLE
jack
On your TV
