background image

2

 NS-24E200NA14

www.insigniaproducts.com

Important Safety 
Instructions

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in 
accordance with the manufacturer's 
instructions.

8

Do not install near any heat sources such as 
radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat.

9

Do not defeat the safety purpose of the 
polarized or grounding-type plug. A polarized 
plug has two blades with one wider than the 
other. A grounding type plug has two blades 
and a third grounding prong. The wide blade or 
the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, 
consult an electrician for replacement of the 
obsolete outlet.

10

Protect the power cord from being walked on or 
pinched particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus.

11

Only use attachments/accessories specified by 
the manufacturer. 

12

Use only with the cart, stand, 
tripod, bracket, or table specified 
by the manufacturer, or sold with 
the apparatus. When a cart is 
used, use caution when moving 
the cart/apparatus combination 
to avoid injury from tip-over. 

13

Unplug this apparatus during lightning storms 
or when unused for long periods of time.

14

Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has 
been damaged in any way, such as 
power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or 
has been dropped.

15

The 

wall plug 

is the disconnecting device. The 

plug must remain readily operable.

16

Remote control batteries should not be exposed 
to excessive heat such as sunshine, fire, or the 
like.

17

The apparatus should not be exposed to 
dripping or splashing, and no objects filled with 
liquids, such as vases, should be placed on the 
apparatus.

WARNING

Electric shock hazard

To reduce the risk of fire or electric shock, do not 
remove any cover or expose the device to rain or 
moisture. No user-serviceable parts are inside. Refer 
servicing to qualified service technicians.

Lightning

For added protection for your device receiver 
during a lightning storm, or when it is left 
unattended and unused for long periods of time, 
unplug it from the power outlet and disconnect any 
antenna or cable system. This helps prevent 
property damage and personal injury from 
lightning and power line surges.

Power lines

An outside antenna system should not be located in 
the vicinity of overhead power lines or other 
electric light or power circuits, or where it can fall 
into such power lines or circuits. When installing an 
outside antenna system, take extreme care to keep 
from touching such power lines or circuits as 
contact with them might be fatal.

Handling the LCD panel

• Your TV’s screen is made of glass. Do not drop 

your TV or hit, jolt, or press hard against the LCD 
panel. If the screen breaks, be careful of broken 
glass. 

• If the LCD panel is broken, make absolutely sure 

that you do not touch the liquid in the panel. This 
may cause skin inflammation. 

• If the liquid gets in your mouth, immediately 

gargle, rinse, and consult with your doctor. Also, if 
the liquid gets in your eyes or touches your skin, 
consult with your doctor after rinsing for at least 
15 minutes or longer in clean water. 

Replacement parts

When replacement parts are required, make sure 
that the service technician uses replacement parts 
specified by the manufacturer that have the same 
characteristics as the original part. Unauthorized 
substitutions may result in fire, electric shock, 
personal injury, or other hazards.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that 
dangerous voltage 
constituting a risk of electric 
shock is present within your TV. 
This label is located on the 
back of your TV.

This symbol indicates that 
there are important operating 
and maintenance instructions 
in the literature accompanying 
your TV.

Содержание NS-24E200NA14









































































Отзывы: