14
IS-TV040928 27” HD-Ready TV
www.insignia-products.com
To connect to cable TV with a converter box or to a satellite dish:
1
Connect the incoming 75
Ω
coaxial cable to the converter/
descrambler box.
2
Connect the output of the converter box or satellite box to the
antenna jack on the back of your HD-Ready TV.
3
Set your HD-Ready TV to the output channel of the converter box
or satellite box (usually 3 or 4), then use the converter box or
satellite box to select channels.
To connect cable TV with basic (unscrambled) channels and scrambled
channels:
1
Connect the 75
Ω
cable from the cable TV service to a splitter (not
supplied).
2
Connect a 75
Ω
cable from the splitter to the cable converter box
input jack, then connect another 75
Ω
cable from the converter
box output jack to the A jack on an A/B switch box (not supplied).
3
Connect a 75
Ω
cable from the splitter to the B jack on the A/B
switch box.
4
Connect the A/B switch box to the VHF/UHF jack on the back of
your HD-Ready TV
5
To watch scrambled channels, set the switch box to the A position,
set your HD-Ready TV to the output channel of the converter box
(usually 3 or 4), then use the converter box or satellite box to
select channels.
Or
To watch unscrambled channels, set the switch box to the B
position, then use your HD-Ready TV remote control to tune
channels.
Incoming
75
Ω
CATV
cable
Converter box/
satellite box
75
Ω
cable to
TV/VCR
Incoming 75
Ω
CATV cable
Converter box/
satellite box
A/B switch
75
Ω
cable
27-inch HD Ready TV.book Page 14 Monday, August 22, 2005 9:58 PM