SKYUS 100BSERIES USER GUIDE
20
WithUSBOTG,theSkyus100BSeriescanpowertheexternaldeviceusingUSB2.0(5VDC@1A),
but the Skyus 100B Series device must be plugged into power using the 4 Pin connector.
ThissituationisusefulwhenconnectinganexternalUSBmodem(e.g.SkyusDS,SkyusDS2,or
Skyus SC) for failover and/or load balancing.
Connecting viaWi-Fi
NOTE:
This method is only available on select models.
To connect using Wi-Fi:
1. Ensure the Skyus 100B Series router is powered on.
2. ConnecttotherouterusingtheSSIDandPasswordinformationprovidedonthelabelonthe
bottom of the router.
3. ItisstronglyrecommendedtochangetheSSIDandPasswordfromthedefaultforsecurity
reasonsafterinitialuse.Makesuretosavetheupdatedinformationinasecurelocation.
Connecting via Bluetooth
NOTE:
This method is only available on select models.
[NEED INPUT]
Connecting to the Web UI
Onthedeviceconnectedtoyour Skyus100BSeriesrouter,openanywebbrowserandgoto
http://my.skyus/ or http://192.168.1.1.
Select
SignIn
(inthetop-rightcornerofthescreen),andenterthepasswordprintedonthe
bottom of your router.
Resetting yourRouter
YoucanrestartyourSkyus100BSeriesrouter,orrestoresettingstothefactorydefaults.Youcando
this using the Web UI at
Settings > Backupand Restore
, or by clicking the Sign Out drop-down in the
top-right corner of any Web Interface page and selecting
Restart
.
Alternately, you canuse the
RESET
button on the device,located inside a cornerofthe battery
compartment. The button is a small hole about 1.5mm in diameter, with the word RESET below it. Use
a small pointed object, such as a paperclip, to push the RESET Button.
To restart the router:
Press the
RESET
button quickly (less than one second). This turns your router
off and on again and does not affect settings.
Torestoretheroutertofactorydefaultsettings:
Pressandholdthe
RESET
buttonforthreeseconds
or longer. This resets all settings to their factory default values.
