SKYUS 100BSERIES USERGUIDE
16
In line-of-sight to wireless devices
Near the computers or other devices that communicate with the router
On an upper floor (if applicable)
NOTE:
When using multiple points of access, use different radio frequency channels for adjacent
accesspoints. Werecommendleaving 5spaces between channels(e.g.1 and6, or 3and 8).
Mounting the Device
You can mount your Skyus 100B Series device using the following methods:
Mounting withScrews
Mounting with Double-Sided Tape
WARNING!
Whilemountingyourdevice,donotapplyexcessiveforcetothemountingbracketsasthis
may cause the tabs to fail. Installation is recommended to be completed by a professional.
MountingwithScrews
CAUTION!
If using rigidmountinghardware, apply pressureonly to the ends of the device. Limit the
mounting pressure only to the amount needed to secure the device.
To mount your device using screws, follow the directions below, using two #4 or #6 screws.
1. Identify the optimal installation location. Make sure you consider the physical space
requirements of the device, any needed connectors, cables, and antennas. In addition, make
sure you consider mounting location to optimize cellular coverage.
2. Identify the optimal mounting equipment. Depending on installation location, you may want
to select wood screws, metal self-tapping screws, drywall anchors, concrete anchors, or others.
3. Locate and install a screw for Hole 1. Make sure the screw head remains 1/8” (3mm) away from
the wall.
