INOXPA KIBER KVB-25, Инструкции по установке, обслуживанию и техническому обслуживанию, Страница: 8 / 20

2021/11 4.Installation 7
Serial number
4. Installation
4.1. PUMP RECEPTION
INOXPA is not responsible for any deterioration of the material as a result of its transportation or
unpacking. Visually check that the packing has not suffered any damage.
The pump will be accompanied by the following documentation:
• Dispatch notes.
• Pump Instruction and Service Manual.
• Motor Instruction and Service Manual (*).
• (*) If the pump has been supplied with a motor from INOXPA.
Unpack the pump and check the following:
• The pump suction and delivery connections, removing the remains of any packing material.
• Check that the pump and the motor have not suffered any damage.
• Should the pump not be in proper condition and/or does not have all the parts, the haulier
must draw up a report as soon as possible with regard to the same.
4.1.1. Pump identification and marking
Qm /h
kW
3
MODEL
min
-1
V
Hm
Nº
YEAR
Hz
Tel.972 57 52 00 Fax.972 57 55 02
17820 BANYOLES GIRONA (SPAIN)
C. Telers, 54 P.O. BOX 174
INOXPA S.A.
www.inoxpa.com
.
.
.
Pump plate
4.2. TRANSPORT AND STORAGE
Lift the pump through the drive support as is shown below: