Installation
INOXPA S.A.U.
20.005.30.01EN · (0) 2019/02
9
BCI
1.
18
-
4
007
-
1
- 150
Diameter of agitation element
100 100 mm
130 130 mm
150 150 mm
Motor
1
IP-55
2
IP-65
3
Flameproof
4
Explosion-proof
5
Single phase
Motor power
001
0,18 kW
005
0,55 kW
007
0,75 kW
Motor speed
4 poles
1500 rpm
6 poles
1000 rpm
8 poles
750 rpm
Type of agitation elements
18
Type lineflux
Number of agitation elements
1
one agitation element
2
two agitation element
Name of the agitator
BCI
vertical agitator with motor
5.3. TRANSPORT AND STORAGE
According to the model, the agitators are too heavy to be stored or installed manually. Use an
appropriate mode of transport. Do not handle the agitator by the shaft as this may become
deformed.
Take all possible precautions when lifting the agitator. Always use properly attached slings when
moving the agitator with a crane or other lifting device.
If the agitator is not to be installed immediately, it must be stored in an appropriate place. The shaft must be
stored in a horizontal position and placed on wooden supports or for a similar material. In this position, the shaft
will not become deformed but it must not be subject to any type of load.
ATTENTION
ATTENTION
NN
