EN7017 Survey Kit and App Installation
and Site Survey Instructions
Use a mini USB charging cable and any standard USB charger to fully
charge the survey receiver. The LED will light red while charging, and
turn off when fully charged.
3. Download and open the Site Survey App by Inovonics.
Select the Inovonics device that matches the MAC address on the
back of your survey receiver to pair it with the app. Once paired,
the receiver LED will light green.
If located somewhere other than North America, select
your frequency band.
•Survey kit carrying case.
•EN4017SK survey receiver.
•EN1223SK pendant survey
transmitter.
•Mini USB charging cable.
Use a pen or a paper clip to move the switch up to activate the
survey receiver battery. The survey receiver battery can remain
activated indefi nitely, and once activated, the survey receiver LED
will blink green until paired.
Install the Survey Kit and App
02.02.17 06818B © Inovonics, 2017 - www.inovonics.com