UM_APIX2_ADK_TX (Rev2) Revision 1.2_A1
Inova Semiconductors Confidential
Page 25 of 37
User Manual
The connectors SV1, SV2, X1 and X2 need to be connected through specific cables provided with the kit to the
master boards.
Dip Switch S1 needs to be set to 00011000 ([8:1]).
Master board connector
Ethernet board connector
Description
SV1
SV1
Power supply
SV2
SV2
Control signals
X5
X1
Data lines
X6
X2
Data lines
Table 6-2: Interconnect between Ethernet and Master board
