Inotek LCD2301 Скачать руководство пользователя страница 1

English

Installation

 

Instruction

UNPACKING INSTRUCTIONS

!

  Carefully  open  the  carton,  remove  contents  and  lay  out  on  cardboard  or  other 

protective surface to avoid damage.

!

  Check  package  contents  against  the  Supplied  Parts  List  in  the  next  page  to  assure 

    that  all  components  were  received  undamaged.    Do  not  use  damaged  or  defective 

   parts.

!

 Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

Install  and  operate  this  device  with  care.    Please  read  this  instruction  before 

beginning  the  installation,  and  carefully  follow  all  instructions  contained  herein.  Use 

proper safety equipment during installation.

Please call a qualified installation contractor for help if you:

!

  If  you  don't  understand  these  directions  or  have  any  doubts  about  the  safety  of  the 

installation.

!

  If  you  are  uncertain  about  the  nature  of  your  wall,  consult  a  qualified  installation 

contractor.

Do not use this product for any purpose or in any configuration not explicitly specified 

in  this  instruction.    We  hereby  disclaims  any  and  all  liability  for  injury  or  damage 

arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

1

Содержание LCD2301

Страница 1: ... read this instruction before beginning the installation and carefully follow all instructions contained herein Use proper safety equipment during installation Please call a qualified installation contractor for help if you If you don t understand these directions or have any doubts about the safety of the installation If you are uncertain about the nature of your wall consult a qualified installa...

Страница 2: ...teel studs or to cinder block walls If the hardware you need for your installation is not included please consult your local hardware store for proper mounting hardware for the application Tools Required 3 8mm Drill Bit Phillips Screwdriver 8mm Masonry Bit Carpenter s Level 1 Mornitor Bracket c 1 Wall Plate a 1 Screw Cover d 1 Arm Assembled b 4 M4 M6 Space k 4 M4x12 Bolt e 4 M4x30 Bolt f 8 M4 Wash...

Страница 3: ... a l Wood Mount 1 Before do this step make sure the Wall Plate a had been fixed on the wall 2 Put the Screw Cover d on the Arm Assembled b 3 Inter the Arm Assembled as showed in the left picture a b d Make sure the stop screw is on the bottom side when do this step Make sure the stop screw is on the bottom side when do this step ...

Страница 4: ... TV Step 4 Thanks for choosing our products enjoy the using For Flat Back TV For Curved Back TV Attaching TV to Wall Plate and Adding the Knobs This way up e g i j This way up f h i j i k n Step 5 Install the Cable Management Ring on the Arm o ...

Отзывы: