InoTec SCAMAX H12 Скачать руководство пользователя страница 13

Страница: 13 / 136

Introduction

User Manual H12 / SCAMAX® 8x1 - Version 2019.12

Page 13 of 136

1.2.2.2. Danger Spot Seize/Entangle

The beside warning icon indicates to the risk of seize or entangle, which is caused by

the fast rotating Input Rollers or Paper Transport Rollers in case of this scanners. Besi-

de the risk to grab with the fingers into the rotating rollers, it is offering a higher risk

to entangle long hairs or similar parts in it.

As the Transport Area is inside the

scanner and the unit can’t be driven

in an open condition or with mis-

sing covers, only the Paper Input,

means the Feeder Roller Assembly,

and the front Transport Rollers of

the Paper Output in the Output

Hoppers are pointed as danger

spots. While the Paper Transport

is running, it is not allowed to grab

into the moving areas and long

parts (

hairs, chains, ties, etc.

) which

can entangle into the rollers must

kept away from it.

1.2.2.3. Danger Spot Crush/Jam 1

This warning icon indicates to the possible risk of crush or jam body parts while open

or close the different scanner parts (

see chapter

). While opening the scanner parts,

the danger spots are located at the rear side of the scanner inside the wedge-shaped

housing notches above the Rear Paper Output and between the two Output Hoppers.

While closing the scanner parts, the areas between the surfaces which overlaps in

closed condition are more relevant.

Содержание SCAMAX H12









































































































































Результаты поиска

Содержание SCAMAX H12

Отзывы:

Похожие инструкции для SCAMAX H12

Бренды по названию

Популярные бренды

InoTec SCAMAX H12, Руководство пользователя

Результаты поиска

Содержание SCAMAX H12

Отзывы:

Похожие инструкции для SCAMAX H12

Бренды по названию

Популярные бренды