12.09.2019
9
QUICK START GUIDE :
brake
unit extern
4. FUNCTION PARAMETER DESCRIPTION
Parameter setting switch and control terminal
Note
：
Only PB6034 have M
，
S slave and host selection
，
but other type no. The voltage class is set
OK during the factory setting.
Warning
：
Incorrect selection of the slave and host will lead abnormal running and
damage!
Description of control circuit terminal of the brake unit
Terminal
Specification
Note
Parameter
Setting
switch
1
Slave and host selection switch, when
M is ON, the brake unit is set to be
host brake unit
Factory
setting:
ON
2
Slave and host selection switch, when
S is ON, the brake unit is set to be
slave brake unit.
Factory
setting:
OFF
C
ontrol
M1/M
2
Slave and host control terminal
S1/S2 Slave and host control terminal
TH1/
TH2
OH protection switch(always close)
