Innovative NV9, Руководство по эксплуатации

Страница: 8 / 41

Copyright Innovative Technology Ltd 2008 GA326-6
4.1 DIPSWITCH SETTINGS
The four DIPswitches can be set to a combination of either up or down depending on
e configuration required for the particular NV9.
ed Opti ns
e interface. Details of the
this manual.
- Switch 3 and ine Interface Select
The etails o llel, pulse, and SSP be found in the machi terface protocols
secti of this man
less specified by order). The table below shows all the options that
ded by the user:
formation on each o interfaces protocol
ection’ of this manu
of the DIPswitches on the top of the unit and
re used to indicate a variety of status signals.
th
Switch 1 – Spare
Switch 1 currently has no function and is reserved for future use.
Switch 2 – Extend o
This switch is used d to mo ify the behaviour of the selected machin
function of this switch are covered in the interfaces’ description in
Switches 3 and 4 – Machine Interface protocol selection
These switches are used to select the machine interface to be used. The NV9 supports
numerous interfaces, as shown below, (see table 1).
Table 3 4 Mach ion
d f the para can ne in
on ual.
Special Modes
The special interface depends on the firmware that is used in the NV9, the firmware shipped
as standard is ccTalk (un
can be downloa
In f these interfaces can be found in the ‘machine
al. s
4.2 LED STATUS CODES
The three status LED’s are located to the right
a
The red status is used to indicate system problems, while the green status indicates system
health; these are described below in table 2.
Interface Switch 3 Switch 4
Parallel Down Down
Pulse Down
Up
SSP Up Down
Special Up
Up
BINARY
SIO
MDB
ccTalk
SI2
CCNet
NIS & U
nencrypted ccTalk available on request
only
NV9 Operations Manual 8