NV10 FAMILY USER MANUAL
Copyright © Innovative Technology Ltd 2016
Doc: GA02116 - NV10 FAMILY USER MANUAL
Version:1.1
Page 43 of 80
6.6.5
Low Power Mode
The Low Power Mode can be used to reduce the power consumption of the
N when idle. When the Low Power Mode option is set, the N
goes into the Low Power Mode after about 6 seconds after the N is
powered up and remains in this state until a note is entered. Following a note
insertion, the N returns to Low Power Mode approximately 1 second after
a credit is given or note is rejected. Please, refer to
6.6.6
Escrow Control
The N has a single note escrow facility. This allows the NV10 USB/+ to
hold onto the note once validated, and then only stack the note into a cashbox when
the host machine confirms that the Vend operation has been completed. Please refer
to
for timing diagram and further details.
6.6.7
IF9 Interface
The IF9 is an interface that allows serial SSP to be used in machines without the
need of updating the machine software. The IF9 is connected between the NV10
USB/+ and the host machine. The IF9 communicates with the NV10 USB/+ in serial
SSP which gives more security along the length of the cable. The IF9 should be
mounted close to the host machine control board.