background image

NV9 Operations Manual GA326-4

8 of 38

© Copyright Innovative Technology Limited 2005

4: General Description

NV9 Validator - the next generation of Smiley® Bank Note Validators

The NV9 Bank Note System is a compact note-validating machine (see figure 1), suitable for most money
machines. It will accept up to 16 different denominations of notes in the serial control mode or 4 different
notes in parallel mode, and will cope with different designs of banknote having the same value such as are
found in the United Kingdom and Scotland.

Figure 1 – The NV9 with Vertical and Universal Bezels

The NV9 Validator leaves the factory preset to at least one currency so that it is ready for immediate
installation. If it is required to change the currency data set this may be done using either the NV9 to NV9
currency cloning system or the PC based Currency Management software.

New currencies and applications are being tested all the time, please refer to our web site or contact the
factory for information concerning specific currencies if they are not already included on our approved list.

The NV9 is designed for easy installation in most machines. The stepped “smiling mouth” allows insertion of
notes with one hand and simplifies the note handling mechanism.

Interfacing the Validator is very simple, with the choice of the following protocols:

  Parallel open collector outputs.

  Pulse stream open collector output.

  Binary open collector output.

  Smiley® Secure Protocol (SSP) secure serial communications.

  Simple serial I/O communications.

  MDB interface protocol.

 CCTalk

  Extended Interface / USA Serial

Vertical And

Horizontal Bezel

Bezel

Locking Arm

Status LEDs

Interface

Connector

Clip On Cash Box

DIPswitches

Содержание GA326-3







































Отзывы:

Похожие инструкции для GA326-3