background image

NV9 Operations Manual GA326-4

29 of 38

© Copyright Innovative Technology Limited 2005

12 Support Tools

The following support tools are available for use with the NV9 Bank Note Validator:

1.  ITL BNV download manager Software.

2.  Downloads from the Innovative Technology Ltd website:

www.innovative-technology.co.uk

3.  E-mail Support

[email protected]

.

12.1 PC Currency Programming Software (ITL BNV Download Manager)

The ITL BNV download manager software offers the following functions:

  Program the Validator by downloading pre-prepared currency data via the serial communications link

using the DA1 kit or DA2 kit using the USB link.

  Check the firmware version and currency set already loaded on an NV9 unit.

  Adjust the channel and pulse configuration on a pre-programmed NV9 to your own requirements.

  Download a new version of firmware onto the NV9.

  Use diagnostic functions to check Validators operation (firmware version 3.15 and greater only).

The software will run on an IBM compatible Personal Computer with Pentium™ processor or equivalent and
requires a DA1 kit fitted to the serial port or DA2 kit fitted to the USB port depending on the operating system
that you are using (see

Appendix C

).

12.2 Internet Website support

The Innovative Technology Ltd website provides the means to download new and updated currency sets and
new versions of firmware for the NV9. Visit

www.innovative-technology.co.uk

to register your user name

and to access the password for further details, updates and technical bulletins, which are also made
available.

How to register for the first time log in, please refer to

Appendix D

.

12.3 E-mail Support

If the data you require is not available over the Internet Innovative Technology supports an e-mail system to
help customers with unusual requirements. The address is

[email protected]

Содержание GA326-3







































Отзывы:

Похожие инструкции для GA326-3