Innovative Technology GA326-3, Руководство по эксплуатации

Страница: 22 / 38

NV9 Operations Manual GA326-4
22 of 38
© Copyright Innovative Technology Limited 2005
8 Updating Currency and Firmware
Note : Validators are supplied already programmed from the factory. Please skip this section unless the
validators need to be re-programmed with a new note or currency.
The NV9 Validator can only be re-programmed using the ITL BNV download manager 2.9.7 or greater or by
cloning from a master unit.
8.1 ITL BNV Download Manager
To use the ITL BNV download manager software, which is supplied with a range of currencies. The system
will require you to be running a PC Windows 95/98/NT™2000 or XP Professional, Pentium™ (© Microsoft
and Intel).
A list of currently supported currencies is maintained on our web site, and new releases can be downloaded
from www.innovative-technology.co.uk. Further details are available from
support@Innovative-
technology.co.uk
How to register for the first time log in, please refer to Appendix D .
8.2 NV9 – NV9 Copy (Cloning)
Overview
This facility exists for a NV9 Bank Note Validator to copy its program and settings to another NV9. The
‘Master’ Validator will transmit the currency data and upgrade the slave’s firmware. For cloning it is
recommended to use the cloning kit 2 (CK2).
Requirements
•
Master to have firmware 3.15 or greater
•
Cloning kit 2
•
12V power supply.
Figure 8 – Cloning Kit 2
Start-up configuration
•
Remove power from slave and master units.
•
Set DIPswitches 3 up and 4 down to select SSP interface mode on both NV9’s.
•
Using the NV9 cloning kit (CK2) connect the two units together as above.
•
Turn on the 12V supply .
•
The Master unit will update the slave firmware if the version of the Master is greater than the slave. If
the master firmware is less than the slave, then the copy process is aborted.
•
If the firmware on the master and slave are the same only the currency will be transferred.