background image

10 

SET-UP / TESTING 

NEW JERSEY 

SAFETY PRECAUTIONS 

 

WARNING: WHEN INSTALLING THIS GAME, A 3 
PRONG GROUNDED A.C. RECEPTACLE MUST 
BE USED. FAILURE TO DO SO COULD RESULT 
IN INJURY TO YOURSELF OR OTHERS. FAILURE 
TO USE A GROUNDED RECEPTACLE COULD 
ALSO CAUSE IMPROPER GAME OPERATION, 
OR DAMAGE TO THE ELECTRONICS 
 
DO NOT DEFEAT OR REMOVE THE GROUNDING 
PRONG ON THE POWER CORD FOR THE SAME 
REASON AS GIVEN ABOVE. USING AN IMPROP-
ERLY GROUNDED GAME COULD VOID YOUR 
WARRANTY. 
 
HAVE A QUALIFIED ELECTRICIAN CHECK 
YOU’RE A.C. RECEPTACLE TO BE SURE THE 
GROUND IS FUNCTIONING PROPERLY. 

 
 

PROGRAMMING YOUR GAME

 

 

This section will give you a detailed explanation of 
the functions and operating characteristics of each 
of the programming buttons.  
 
PLEASE READ THIS SECTION CAREFULLY TO 
AVOID PROBLEMS WITH YOUR GAME. 
 

PLEASE NOTE:  THE PROGRAMMING AND 
TICKET RESET BUTTONS ARE LOCATED IN-
SIDE THE LEFT HAND COIN DOOR. ADDITION-
ALLY, THERE IS A SINGLE TICKET RESET BUT-
TON INSIDE THE RIGHT HAND COIN DOOR. 

 
 
 

DISPLAY INFORMATION

 

 

 

THE RIGHT HAND FROG DISPLAY WILL SHOW 
YOU THE 

OPTION

 YOU ARE IN. THE LEFT HAND 

DISPLAY WILL SHOW THE 

VALUE OR SETTING 

FOR THAT OPTION. 

PROGRAMMING BUTTON

 

 

Press this button to enter or exit the PROGRAM-
MING mode. You will notice when you are in the 
Programming mode, as the displays in the Frogs will 
change. 

 
 
 

SELECT BUTTON

 

 

This button is used to change from one option to the 
next. When this button is pushed, the option number 
is shown in the display window of the RIGHT HAND 
Frog. 

 
 
 
 

ADVANCE

 

 

This button is used to change the value within the 
option. When this button is pushed, the value will be 
shown in the LEFT HAND Frog. 

 
 
 

TICKET RESET BUTTON

 

 

When the game runs out of tickets, it keeps track of 
how many are owed.  When more tickets are in-
serted, the game will attempt to dispense all of the 
tickets that are still owed. If the operator does not 
wish to dispense these tickets when reloading, press 
the "Ticket Reset" button BEFORE replacing the 
tickets. The tickets Reset buttons are located inside 
the coin doors. 

 
 
 

OPTION MODES

 

 

MODE 0 

(COINS PER CREDIT)

 

 

This option determines how many coins are neces-
sary to start a game. The range for this game is 1-
10. The default value for this mode is "1" 

Содержание Wacky Ducks





































Отзывы: