14
Innovative Circuit Technology Ltd.
inputs at a rate of up to 1 sample per minute. View this Comma Separated
Values (CSV) format log by clicking the
Download Log
button, and open in
any Spreadsheet software, such as Microsoft Excel. The log will store up to
30days of data, with the oldest entries at the top of the file, newest at the
bottom.
Log Start Date
: Shows the date/time the most recent log began.
Output Setup
This page allows you to configure the output settings of the panel. In the
Select
an Output
to edit
box, click on the output number of the output you wish to
configure. To save any changes to the output settings, click on
Save Settings
at
the bottom of this page.
To copy the configuration settings from one output to all of the other outputs,
click on
Copy Settings to All
, and then click on
Save Settings
to save the new
settings.
Output Settings:
Output Label
: Enter a descriptive label for the selected output channel if
desired.
Output State After Panel Reset
: Sets the state for the output after an input
power failure, or soft reset of the panel. Select one of the following:
•
Restore last State
: If this option is selected, the panel will
remember if this output was enabled or disabled prior to the
power failure or reset. The output will be restored to the same
state after the panel starts up. (default)
•
Enable Output
: If this option is selected, this output will always
be enabled after the panel starts up after a power failure or
reset.
•
Disable Output
: If this option is selected, this output will always
be disabled after the panel starts up after a power failure or
reset.
Ignore Fuse Status:
Will mask the fuse open circuit detection, to prevent
false alarms on unused channels.
Enable Power Cycling:
Check this box to enable output power cycling for the
selected output, so that the output will automatically be re-enabled after
the
Sequence/Cycle Delay
time whenever the output is disabled using the
Output Off
button on the
Status & Control
page. This feature is useful for
remotely resetting power to hardware required for the network connectivity
of the panel.
