Innovatech TERMINATOR-2000e, Руководство по эксплуатации и обслуживанию

Страница: 17 / 58

INNOVATECH PRODUCTS AND EQUIPMENT CO., INC.
17
Taking Up Floor Coverings
1.) Insert blade. (As explained above)
2.) Lower blade to floor. Lift caster wheel off the floor ¼ inch. Use previous procedures to drive
forward.
3.) As the Terminator® is removing flooring material, it is recommended to have another person at the
side of the machine remove all debris.
BALLAST
The Terminator® is equipped with weights in front (75 pounds each) and rear (125 pounds each) to
provide traction for tough jobs. These weights can be removed to reduce traction for certain jobs, and
to transport the Terminator® by forklift or truck or elevator. Wear gloves when handling these weights.
Use caution to not smash toes and fingers. Use OSHA approved lifting technique.
Figure 5 - Front Weight Ballast