2A-1
Use a stud finder(not
included) to locate wood
studs or use an awl (not
included) to verify the edges.
Mark the edge and center
locations.
WARNING:
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum 1½ x 3½
in. (38 x 89 mm)
● Stud center must be verified
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws
[A1]. Tighten the lag screws [A1] only until the they are pulled firmly against the arm
assembly/wall plate [01].
●Ensure the arm assembly/wall plate [01] is securely fastened to the wall
before continuing to the next step.
Step 2 Attach the Arm Assembly/Wall Plate [01] to Wall
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B
Step2A Wood Stud Option
2A-2
●
DO NOT USE ANCHOR [A2] FOR THIS STEP!
X
Position the arm assembly/wall plate[01]
at your desired height and line up the
holes with your stud center line. Level
the wall plate and mark the holes.
UP
awl
(Not lncluded)
08
