REV. 03/05/2020 PN:
PG:1
1 year on step and closure.
1 year on hardware.
MANUFACTURER WARRANTY
Fiesta Shell
A
x8 x8 x8
A B C
Contents of Accessory box 1001-HRK
SCREW BAG 140-0008
x2
x2
x4
x4
x1
x2
Required tools
(not included)
Also needed but not included
Sand
15 lbs
Phillips #2
Phillips #3
7/16 wrench
Phillips bit
Contents of the Self-Latching box SKU # 9600
MAXIMUM functional
width is 1/4’’.
A weather-resistant
padlock is recommended
(not included).
FIESTA/OPERA WITH SELF-LATCHING 9600
WARNING
Install the step on a flat surface.
Do not jump or dive from the step or ladder.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer’s instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
1)
Insert the four posts into
the step and secure them in
place with the bolts,
washers, and nuts
provided.
2)
Insert the platform over
the two rear posts. Do not
secure.
3)
Insert the small and large
handrails as illustrated.
Secure the large handrails
with the screws provided.
Leave the small handrails
floating.
Useful tip!
To ease the installation of
handrails and bolts, use a
Phillips screwdriver to line
up the holes.
x8
D
2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
x8 x8 x8
(1 IN.)
(1
¹⁄2
IN.)
(
³⁄4
IN.)
x16 x12
A B C D
E
Opera Shell
Security straps
x2
x2
x2
(3/4 IN.)
x12
(2 1/2 IN.)
x2
SCREW BAG 140-0016
(2 1/2 IN.)
F
G
D C
x2
x4
x3
Fiesta with Self-Latching
