background image

 

Operating Manual  

      IP Adapters                   

 

- 1 -           

 

1.  Declaration of Conformity 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation.  

If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:  

¾

  Reorient or relocate the receiving antenna. 

¾

  Increase the separation between the equipment and receiver. 

¾

  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

¾

  Consult the dealer or an experienced radio/TV technician for help. 

 

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. 

This Class B digital apparatus complies with Canadian ICES-003. 

2.  About this manual 

This manual describes features of the telephones on the innovaphone IP21, IP22, 
IP24 and IP28 adapters.  

As well as the usual operation of the telephone, the additional features specifically 
for the PBX telephone system are described.   

The features are implemented using shortcut keys (feature codes), which are 
explained in this manual.  

Additional information on administration may be found in the VoIP gateway and 
innovaphone PBX manuals available in the download area of the innovaphone Web 
site at www.innovaphone.com. All instructions specified there should be followed 
carefully and the devices should only be used in accordance with these instructions. 
 

Please check for new versions in the download area.  

Содержание IP21















Отзывы: